PVC COATED FABRIC
Saat ini bahan PVC Coated berkembang secara drastis. Menyadari sepenuhnya akan kebutuhan yang dapat digunakan untuk tenda, penutup truk, penutup kendaraan, peralatan pribadi & terpal penutup umum dalam konteks tampilan militer atau tentara.
Dirancang untuk memenuhi spesifikasi aplikasi luar ruangan, karakteristik tahan air yang tinggi, dan kinerja tahan api menjadikannya material luar ruang yang ideal untuk semua aplikasi cuaca.
COMPOSITE MEMBRANE
1. Base Fabrics
2. Primary Coating
3. Top Coating
4. Surface Treatment (Lacquering)
TECHNICAL SPECIFICATION
Technical Properties 750AIO
Technical Properties 751
Coating Material : PVC (Polyvinyl Chloride)
Base Fabric : High Tenacity Polyester
Total Weight : 750 gr/m2
Width : 250 cm
Thickness : 0.58 mm
Tensile Strength : 200 daN/5cm
Tear Strength : 30 daN
Working Temperature : -30 ∼ +70 oC
Flame Retardancy : Available upon request
Adhesion : 10 daN/5cm
Finishing : Glossy/Matte
Quality Management System : ISO 9001:2008
Standard EN ISO 2286-2 : Total Weight & Thickness
Standard EN ISO 1421 : Tensile Strength
Standard EN ISO 2411 : Adhesion
Standard DIN 53363 : Tear Strength
Coating Material : PVC (Polyvinyl Chloride)
Base Fabric : High Tenacity Polyester
Total Weight : 750 gr/m2
Width : 150 cm
Thickness : 0.95 mm
Tensile Strength : 200 daN/5cm
Tear Strength : 25 daN
Working Temperature : -30 ∼ +70 oC
Flame Retardancy : Available upon request
Adhesion : N/A
Finishing : Glossy/Matte
Quality Management System : ISO 9001:2008
Standard EN ISO 2286-2 : Total Weight & Thickness
Standard EN ISO 1421 : Tensile Strength
Standard EN ISO 2411 : Adhesion
Standard DIN 53363 : Tear Strength
Technical Properties 550ACB
Coating Material : PVC (Polyvinyl Chloride)
Base Fabric : High Tenacity Polyester
Total Weight : 550 gr/m2
Width : 250 cm
Thickness : 0.45 mm
Tensile Strength : 120 daN/5cm
Tear Strength : 25 daN
Working Temperature : -30 ∼ +70 oC
Flame Retardancy : Available upon request
Adhesion : 9 daN/5cm
Finishing : Glossy/Matte
Quality Management System : ISO 9001:2008
Standard EN ISO 2286-2 : Total Weight & Thickness
Standard EN ISO 1421 : Tensile Strength
Standard EN ISO 2411 : Adhesion
Standard DIN 53363 : Tear Strength
Technical Properties 650ACM
Coating Material : PVC (Polyvinyl Chloride)
Base Fabric : High Tenacity Polyester
Total Weight : 650 gr/m2
Width : 250 cm
Thickness : 0.5 mm
Tensile Strength : 280 daN/5cm
Tear Strength : 28 daN
Working Temperature : -30 ∼ +70 oC
Flame Retardancy : Available upon request
Adhesion : 9.5 daN/5cm
Finishing : Glossy/Matte
Quality Management System : ISO 9001:2008
Standard EN ISO 2286-2 : Total Weight & Thickness
Standard EN ISO 1421 : Tensile Strength
Standard EN ISO 2411 : Adhesion
Standard DIN 53363 : Tear Strength
BASE FABRIC
A woven base fabric of high tenacity polyester yarns is the base material to provide tear strength, tensile strength and dimensional stability on finished product.
PRIMARY & TOP COATING
The primary PVC coating impregnate the base cloth to enhance the impressive dimensional stability, high tensile strength and high elongation rupture.
SURFACE TREATMENT
Applying the lacquer on the surface generates the maximum protection quality against atmospheric chemical, microbial and fungal attacks, weather and environment friendly resistance to Ultra Violet Thermal, Rain, Abrasion and Flame Retardant.
MAIN BENEFITS
Printable and Easily Absorb the Ink
Longetivity
Easy Maintenance
Waterproof and Superb Protection Against Ultra Violet
THE MAJOR ADVANTAGES
Limitless architectural design possibility
Low construction cost & efficiency
Available for large size roofings & fitting
Lightweight and flexible yet strong and durable
Easy handling and fast installation
Mobile, temporary and permanent basis use
Weather and environmental friendly
